| Remarks： Overview
HiOSO FC1000A-SFP Gigabit Ethernet Fiber Converter uses the
switching technology to conduct media conversion, which meets the
standards of IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab. It
supports two types of media network connections:
10Base-T/100Base-TX/1000Base-T and 1000Base-SX/LX. It can conduct
mutual conversion between 10Base-T/100Base-TX/1000Base-T twisted
pair electrical signal and 1000Base-SX/LX optical signals. It
extends the transmission distance of a network from 100m over
copper wires to 120Km. This fiber converter supports transmission
in dual-fiber multi-mode、dual-fiber single-mode and single-fiber
single-mode fibers.
Features
- Gigabit Ethernet media converter with SFP slot
- With one LC fiber connector and one RJ45 connector
- Supporting mutual signal conversion between
10Base-T/100Base-TX/1000Base-T and 1000Base-SX/LX;
- Supporting full-duplex and half-duplex transmission modes and
capable of automatic negotiation;
- Supporting automatic cross of twisted pair ports, for the
convenience of system debugging and installation;
- Supporting the transmission of extra-long packets over VLAN;
- Supporting Quality of Service (QoS) and ensuring transmission of
VoIP packets;
- Supporting Spanning Tree Protocol (STP) to form a redundant
network;
- Supporting multiple types of fiber ports such as dual-fiber
multi-mode、dual-fiber single-mode and single-fiber single-mode, to
satisfy the extended requirements of users.
Application
10/100/1000Mbps Gigabit Optical Ethernet network with long-distance
transmission
Technical Specifications
Parameters | Specifications | Access mode | 10/100/1000Mbps Gigabit Ethernet | Standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast
Ethernet, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX Gigabit
thernet, IEEE802.1qVLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree | Wavelength | 850nm/1310nm/1550nm | Transmission distance | Dual-fiber multi-mode: 220m (fiber size: 62.5/125m)/550m (fiber
size: 50/125m)
Dual-fiber single-mode: 10/20/40/60/80/100/120Km
Single-fiber single-mode: 10/20/40/60/80Km
Category-5 twisted pairs: 100m | Port | One RJ45 port: Connected to STP/UTP category-5 twisted pairs
One fiber port: 1000M LC | Conversion mode | Medium conversion | Delay | <10s | Bit error rate | <1/1000000000 | MTBF | 100,000 hours | LED | POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted
pair connection 1000M), TP LINK100 (twisted pair connection 100M),
TP ACT (twisted pair packet forwarding action) | Power | AC220V 0.5A/DC-48V (built-in) | Power consumption | 5W | Operating temperature | -10~55°C | Operating humidity | 5%~90% | Storage temperature | -40~70°C | Storage humidity | 5%~90% (non-condensing) | Dimensions | 38mm(H)*118mm(W)*152mm(D) (height * width * depth) (built-in power)
110mm(H)*22mm(W)*81mm(D) (height * width * depth) (module card) |
|
