| | Remarks： Overview
Ficom FC610B is a kind of 10/100Mbps adaptive fast Ethernet fiber
converter (also called optical-to-electric medium converter), which
can implement mutual conversion between two independent
10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX
optical signal. This type of fiber converter can extend the
transmission distance of a network from the limit of 100m (via
copper wires) to 120Km (single-mode full duplex mode). This type of fiber converter supports two different types of
network connection media types: 10/100Base-TX and 100Base-FX. With
the application of the switching technology and the storing &
forwarding technology, the converter can implement data
transmission between the two types of network connection media. This fiber converter supports transmission in dual-fiber
multi-mode, dual-fiber single-mode and single-fiber single-mode
fibers.
Features
- Adaptive 10Mbps and 100Mbps environment, for the convenience of
network upgrade;
- Efficient built-in switching core, to implement flow control and
reduce broadcast packets;
- Providing two independent 10/100Mbps adaptive switching-type
twisted pair ports, to implement electrical interface backup;
- Supporting full-duplex and half-duplex transmission modes and
capable of automatic negotiation;
- Supporting automatic cross of twisted pair ports, for the
convenience of system debugging and installation;
- Supporting the transmission of extra-long packets (with the maximum
length of 1552 bytes);
- Supporting the transmission of extra-long packets over VLAN;
- Supporting Quality of Service (QoS) and ensuring transmission of
VoIP packets;
- Supporting Spanning Tree Protocol (STP) to form a redundant
network;
- Extremely low power consumption (less than 2W), low heat
dissipation and capable of stable operation for a long period of
time;
- Supporting multiple types of fiber ports such as dual-fiber
multi-mode、dual-fiber single-mode and single-fiber single-mode, to
satisfy the extended requirements of users.
Application
10/100Mbps fast optical Ethernet network with long-distance
transmission
Technical Specifications
Parameters | Specifications | Access mode | 10/100Mbps | Standard | IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,
IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d
Spanning Tree | Wavelength | 850nm/1310nm/1550nm | Transmission distance | Dual-fiber multi-mode: 2Km;
Dual-fiber single-mode: 25/40/60/80/100/120Km;
Single-fiber single-mode: 25/40/60/80/100Km
Category-5 twisted pairs: 100m | Port | Two RJ45 ports: Connected to STP/UTP category-5 twisted pairs
One fiber port: Multi-mode SC or ST (fiber size: 50,62.5/125m)
Single mode SC/FC fiber port (fiber size: 9/125m)
Single-fiber single-mode SC/FC fiber port (fiber size: 9/125m) | Conversion mode | Medium conversion, storing and forwarding mode | MAC address table | I K | Buffer space | 1Mbit | Flow control | Full duplex state: flow control; half-duplex state: back pressure
mode | Delay | 9.6s | Bit error rate | <1/1000000000 | MTBF | 100,000 hours |
|
